 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TC74VCX16374FT TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74VCX16374FT Low-Voltage 16-Bit D-Type Flip-Flop with 3.6-V Tolerant Inputs and Outputs The TC74VCX16374FT is a high-performance CMOS 16-bit D-type flip flop. Designed for use in 1.8-V, 2.5-V or 3.3-V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. It is also designed with over voltage tolerant inputs and outputs up to 3.6 V. This 16-bit D-type flip-flop is controlled by a clock input (CK) and an output enable input (OE) which are common to each byte. It can be used as two 8-bit flip-flops or one 16-bit flip-flop. When the OE input is high, the outputs are in a high-impedance state. All inputs are equipped with protection circuits against static discharge. Weight: 0.25 g (typ.) Features * * Low-voltage operation: VCC = 1.8 to 3.6 V High-speed operation: tpd = 3.0 ns (max) (VCC = 3.0 to 3.6 V) : tpd = 3.9 ns (max) (VCC = 2.3 to 2.7 V) : tpd = 6.0 ns (max) (VCC = 1.8 V) * Output current : IOH/IOL = 24 mA (min) (VCC = 3.0 V) : IOH/IOL = 18 mA (min) (VCC = 2.3 V) : IOH/IOL = 6 mA (min) (VCC = 1.8 V) * * * * Latch-up performance: -300 mA ESD performance: Machine model 200 V Human body model 2000 V Package: TSSOP 3.6-V tolerant function and power-down protection provided on all inputs and outputs 1 2007-10-19 TC74VCX16374FT Pin Assignment (top view) IEC Logic Symbol 1 48 24 25 47 46 44 43 41 40 38 37 36 35 33 32 30 29 27 26 1OE 1Q1 1Q2 GND 1Q3 1Q4 VCC 1Q5 1Q6 1 2 3 4 5 6 7 8 9 48 47 46 45 44 43 42 1CK 1D1 1D2 GND 1OE 1CK 2OE 2CK 1D1 1D2 1D3 1D4 1D5 1D6 1D7 1D8 2D1 2D2 2D3 2D4 2D5 2D6 2D7 2D8 1EN C1 2EN C2 1D 1 2 3 5 6 8 9 11 12 2D 2 13 14 16 17 19 20 22 23 1Q1 1Q2 1Q3 1Q4 1Q5 1Q6 1Q7 1Q8 2Q1 2Q2 2Q3 2Q4 2Q5 2Q6 2Q7 2Q8 1D3 1D4 VCC 1D5 1D6 GND 1D7 1D8 2D1 2D2 GND 2D3 2D4 VCC 2D5 2D6 GND 2D7 2D8 2CK 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 GND 10 1Q7 11 1Q8 12 2Q1 13 2Q2 14 GND 15 2Q3 16 2Q4 17 VCC 18 2Q5 19 2Q6 20 GND 21 2Q7 22 2Q8 23 2OE 24 2 2007-10-19 TC74VCX16374FT Truth Table Inputs Outputs 1D1-1D8 X X L H 1Q1-1Q8 Z Qn L H 1OE H L L L 1CK X Inputs Outputs 2D1-2D8 X X L H 2Q1-2Q8 Z Qn L H 2OE H L L L 2CK X X: Don't care Z: High impedance Qn: No change System Diagram 1D1 47 D 1D2 46 D 1D3 44 D 1D4 43 D 1D5 41 D 1D6 40 D 1D7 38 D 1D8 37 D 1CK 48 CK Q CK Q CK Q CK Q CK Q CK Q CK Q CK Q 1OE 1 2 1Q1 2D1 36 D 2D2 35 D 3 1Q2 2D3 33 D 5 1Q3 2D4 32 D 6 1Q4 2D5 30 D 8 1Q5 2D6 29 D 9 1Q6 2D7 27 D 11 1Q7 2D8 26 D 12 1Q8 2CK 25 CK Q CK Q CK Q CK Q CK Q CK Q CK Q CK Q 2OE 24 13 2Q1 14 2Q2 16 2Q3 17 2Q4 19 2Q5 20 2Q6 22 2Q7 23 2Q8 3 2007-10-19 TC74VCX16374FT Absolute Maximum Ratings (Note 1) Characteristics Power supply voltage DC input voltage DC output voltage Input diode current Output diode current DC output current Power dissipation DC VCC/ground current per supply pin Storage temperature Symbol VCC VIN VOUT IIK IOK IOUT PD ICC/IGND Tstg Rating -0.5 to 4.6 -0.5 to 4.6 -0.5 to 4.6 (Note 2) -0.5 to VCC + 0.5 Unit V V V mA (Note 4) mA mA mW mA C (Note 3) -50 50 50 400 100 -65 to 150 Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: OFF state Note 3: High or low state. IOUT absolute maximum rating must be observed. Note 4: VOUT < GND, VOUT > VCC Operating Ranges (Note 1) Characteristics Power supply voltage Input voltage Output voltage Symbol VCC VIN VOUT Rating 1.8 to 3.6 1.2 to 3.6 (Note 2) -0.3 to 3.6 Unit V V V 0 to 3.6 (Note 3) 0 to VCC (Note 4) 24 (Note 5) (Note 6) (Note 7) C (Note 8) ns/V mA Output current Operating temperature Input rise and fall time IOH/IOL Topr dt/dv 18 6 -40 to 85 0 to 10 Note 1: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND. Note 2: Data retention only Note 3: OFF state Note 4: High or low state Note 5: VCC = 3.0 to 3.6 V Note 6: VCC = 2.3 to 2.7 V Note 7: VCC = 1.8 V Note 8: VIN = 0.8 to 2.0 V, VCC = 3.0 V 4 2007-10-19 TC74VCX16374FT Electrical Characteristics < DC Characteristics (Ta = -40 to 85C, 2.7 V < VCC = 3.6 V) Characteristics H-level L-level Symbol VIH VIL Test Condition VCC (V) 2.7 to 3.6 2.7 to 3.6 Min 2.0 Max Unit Input voltage 0.8 V IOH = -100 A H-level VOH VIN = VIH or VIL IOH = -12 mA IOH = -18 mA Output voltage IOH = -24 mA IOL = 100 A L-level VOL VIN = VIH or VIL IOL = 12 mA IOL = 18 mA IOL = 24 mA Input leakage current 3-state output OFF state current Power-off leakage current Quiescent supply current Increase in ICC per unit IIN IOZ IOFF ICC ICC 2.7 to 3.6 2.7 3.0 3.0 2.7 to 3.6 2.7 3.0 3.0 2.7 to 3.6 2.7 to 3.6 0 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 VCC - 0.2 2.2 2.4 2.2 V 0.2 0.4 0.4 0.55 5.0 10.0 A A A VIN = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND VCC < (VIN, VOUT) < 3.6 V = = VIH = VCC - 0.6 V 10.0 20.0 20.0 A 750 < < DC Characteristics (Ta = -40 to 85C, 2.3 V = VCC = 2.7 V) Characteristics H-level L-level Symbol VIH VIL Test Condition VCC (V) 2.3 to 2.7 2.3 to 2.7 Min 1.6 Max Unit Input voltage 0.7 V IOH = -100 A H-level Output voltage VOH VIN = VIH or VIL IOH = -6 mA IOH = -12 mA IOH = -18 mA IOL = 100 A L-level VOL VIN = VIH or VIL IOL = 12 mA IOL = 18 mA Input leakage current 3-state output OFF state current Power-off leakage current Quiescent supply current IIN IOZ IOFF ICC VIN = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND VCC < (VIN, VOUT) < 3.6 V = = 2.3 to 2.7 2.3 2.3 2.3 2.3 to 2.7 2.3 2.3 2.3 to 2.7 2.3 to 2.7 0 2.3 to 2.7 2.3 to 2.7 VCC - 0.2 2.0 1.8 1.7 V 0.2 0.4 0.6 5.0 10.0 A A A A 10.0 20.0 20.0 5 2007-10-19 TC74VCX16374FT < DC Characteristics (Ta = -40 to 85C, 1.8 V = VCC < 2.3 V) Characteristics Symbol Test Condition VCC (V) 1.8 to 2.3 1.8 to 2.3 Min 0.7 x VCC Max Unit H-level Input voltage L-level VIH VIL 0.2 x VCC V H-level Output voltage L-level Input leakage current 3-state output OFF state current Power-off leakage current Quiescent supply current VOH VIN = VIH or VIL IOH = -100 A IOH = -6 mA 1.8 1.8 1.8 1.8 1.8 1.8 0 1.8 1.8 VCC - 0.2 1.4 V VOL IIN IOZ IOFF ICC VIN = VIH or VIL VIN = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND IOL = 100 A IOL = 6 mA 0.2 0.3 5.0 10.0 A A A A 10.0 20.0 20.0 VCC < (VIN, VOUT) < 3.6 V = = 6 2007-10-19 TC74VCX16374FT AC Characteristics (Ta = -40 to 85C, input: tr = tf = 2.0 ns, CL = 30 pF, RL = 500 ) (Note 1) Characteristics Symbol Test Condition VCC (V) 1.8 Maximum clock frequency fmax Figure 1, Figure 2 2.5 0.2 3.3 0.3 Propagation delay time (CK-Q) tpLH tpHL 1.8 Figure 1, Figure 2 2.5 0.2 3.3 0.3 1.8 Figure 1, Figure 3 2.5 0.2 3.3 0.3 1.8 Figure 1, Figure 3 2.5 0.2 3.3 0.3 1.8 Figure 1, Figure 2 2.5 0.2 3.3 0.3 1.8 Minimum setup time ts Figure 1, Figure 2 2.5 0.2 3.3 0.3 1.8 Minimum hold time th Figure 1, Figure 2 2.5 0.2 3.3 0.3 tosLH tosHL 1.8 (Note 2) 2.5 0.2 3.3 0.3 Min 125 200 250 1.5 1.0 0.8 1.5 1.0 0.8 1.5 1.0 0.8 3.0 1.5 1.5 2.5 1.5 1.5 1.0 1.0 1.0 Max Unit MHz 6.0 3.9 3.0 7.0 4.6 3.5 5.0 3.8 3.5 ns 3-state output enable time tpZL tpZH ns 3-state output disable time tpLZ tpHZ ns Minimum pulse width (CK) tw (H) tw (L) ns ns ns 0.5 0.5 0.5 ns Output to output skew Note 1: For CL = 50 pF, add approximately 300 ps to the AC maximum specification. Note 2: Parameter guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) 7 2007-10-19 TC74VCX16374FT Dynamic Switching Characteristics (Ta = 25C, Input: tr = tf = 2.0 ns, CL = 30 pF, RL = 500 ) Characteristics Symbol Test Condition VCC (V) VIH = 1.8 V, VIL = 0 V Quiet output maximum dynamic VOL VOLP VIH = 2.5 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V VIH = 1.8 V, VIL = 0 V Quiet output minimum dynamic VOL VOLV VIH = 2.5 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V VIH = 1.8 V, VIL = 0 V Quiet output minimum dynamic VOH VOHV VIH = 2.5 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V (Note) (Note) (Note) (Note) (Note) (Note) (Note) (Note) (Note) 1.8 2.5 3.3 1.8 2.5 3.3 1.8 2.5 3.3 Typ. 0.25 0.6 0.8 -0.25 -0.6 -0.8 Unit V V 1.5 1.9 2.2 V Note: Parameter guaranteed by design. Capacitive Characteristics (Ta = 25C) Characteristics Input capacitance Output capacitance Power dissipation capacitance Symbol CIN CO CPD fIN = 10 MHz Test Condition VCC (V) Typ. 6 7 20 Unit pF pF pF 1.8, 2.5, 3.3 1.8, 2.5, 3.3 (Note) 1.8, 2.5, 3.3 Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPDVCCfIN + ICC/16 (per bit) 8 2007-10-19 TC74VCX16374FT AC Test Circuit 6.0 V or VCC x 2 Open GND Measure CL RL Switch RL Parameter tpLH, tpHL tpLZ, tpZL tpHZ, tpZH 6.0 V VCC x 2 Switch Open @VCC = 3.3 0.3 V @VCC = 2.5 0.2 V @VCC = 1.8 V GND Output CL = 30 pF RL = 500 Figure 1 AC Waveform tr 2.0 ns Input (CK) tf 2.0 ns VIH GND tr 2.0 ns Input (D) 90% VM ts (H) Output (Q) th (H) ts (L) th (L) tf 2.0 ns tw (H) tw (L) VIH GND VOH VM tpHL tpLH VOL 10% 90% VM 10% Figure 2 tpLH, tpHL, tw, ts, th 9 2007-10-19 TC74VCX16374FT tr 2.0 ns Output Enable ( OE ) tpLZ Output (Q) Low to Off to Low tpHZ Output (Q) High to Off to High Outputs enabled tf 2.0 ns 90% VM VIH 10% tpZL 3.0 V or VCC VM VX tpZH VOL VOH VM GND Outputs disabled Outputs enabled GND VY Figure 3 tpLZ, tpHZ, tpZL, tpZH Symbol VIH VM VX VY VCC 3.3 0.3 V 2.7 V 1.5 V VOL + 0.3 V VOH - 0.3 V 2.5 0.2 V VCC VCC/2 VOL + 0.15 V VOH - 0.15 V 1.8 V VCC VCC/2 VOL + 0.15 V VOH - 0.15 V 10 2007-10-19 TC74VCX16374FT Package Dimensions Weight: 0.25 g (typ.) 11 2007-10-19 TC74VCX16374FT RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN GENERAL * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 12 2007-10-19 |
Price & Availability of TC74VCX16374FT07
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |